[. . . ] €¢ Disconnect the ground wire after unplugging the power cable. In addition, be sure to connect the ground wire before plugging the power cable. [. . . ] Cautionary Points • Install the equipment near an outlet. Be sure to wire the power cable securely so as to unplug it easily and not to trip over it. €¢ According to the equipment model, these illustrations may differ. €¢ The covers of this equipment have been designed so as not to be easily removed. Therefore, when using tools, be sure not to put your face and hands in the direction in which force will be applied; otherwise this could result in injury. In addition, pay attention not to deform parts by using too much force. €¢ a: 4 When installing [A], be careful not to catch the rear side cables. Insert its latch (E) and then the parts indicated by the arrows as shown in the figure. Select the corresponding label [J] according to the destination and applicable model and attach it. (2) Turn the power ON by means of the main power switch while pressing [0] and [8] simultaneously. (3) [9001] → [START] button (4) Key in the destination number shown below and then press the [OK] button. 23: Turkey 24: South Africa 25: Taiwan 26: Russia 27: Brazil (5) Shut down the equipment by pressing the [ON/OFF] button until a sound is audible. [. . . ] (3) [9001] → [START] button (4) Key in the destination number shown below and then press the [OK] button. 23: Turkey 24: South Africa 25: Taiwan 26: Russia 27: Brazil (5) Shut down the equipment by pressing the [ON/OFF] button until a sound is audible. [. . . ]